We supply one multi-strip per bed. We use the long cord model with a 12-15 ft cord. These also must be UL listed, overload protected with fuse or breaker and have an ON/OFF switch. Since we purchase  around 2,000 in bulk from a local 
supplier we get a good price.

FYI: The AHJ has approved these. They would also approve the plug-in multi tap, if:  1, it plugs into both existing outlets and 2, it has a mounting screw that fastens the unit to the outlet box in lieu of a cover plate.  We don't use this since it still could overload the building's-area circuit breakers.

>>> [log in to unmask] 12/12/00 08:57AM >>>
The New York State Uniform Fire Prevention & Building Code does not allow
extension cords to be used in place of permanent wiring.  I imagine that other
states have similar codes.

Question:

If applicable, how do your respective colleges and universities address this
issue, particularly in older residence hall rooms that may not have enough
outlets, or may have outlets that are not equally spaced throughout the room?
Do you provide/allow power-strips, did you install new outlets, etc.?

If extension cords are found in residence hall rooms, what are your policies
and procedures for disciplinary action and/or corrective measures?  Has any
school rewired its residence halls to address this issue?

Thank you in advance for any feedback.

Michael Lewis, CHMM, Manager
Ithaca College Campus Safety - Life Safety Services
101 Physical Plant/Campus Safety Bldg.
Ithaca, NY 14850
Tele.: 607-274-3757
Fax.:  607-274-1868