The license people were NOT very quick when I ran into this issue.
Literally the longest phone call I was ever on in my life.  6 hours.  I
couldn't convince them to give me a FlexLM key, instead I had to get an
old-style key with support for an additional CAS.  I have an open TAC case
(rather, my reseller does) on getting converted over to FlexLM.  I know that
the old keys are still supported in 4.0 but these seems like one of those
"gotcha" things that will be pulled out at a moments notice.

-- 
Ryan Dorman, CCNP
Network Engineering Specialist
Millersville University
717.871.5883


On 8/7/06 6:24 PM, "King, Michael" <[log in to unmask]> wrote:

> Whoops.
> 
> I ran into that.. I guess I should have posted it.
> 
> The license people are very quick..
> 
> FYI, the license seems to be in a state of flux...  So don't be
> surprised if your IN-Band server shows up as a Out of band server...
> Seems the Out-of-Band is both and Inband and out of band.
> 
> Double check that your CAM key contains the MAC for both your CAMS (if
> you have HA pairs).
> 
> Mine originally didn't.
> 
>> -----Original Message-----
>> From: Perfigo SecureSmart and CleanMachines Discussion List
>> [mailto:[log in to unmask]] On Behalf Of Ken Nelson
>> Sent: Monday, August 07, 2006 6:12 PM
>> To: [log in to unmask]
>> Subject: flexlm/old key issue
>> 
>> Just thought i would post a little info for any older version
>> users looking to install a new CAS, so they don't run into this issue.
>> 
>> Seems the old key and the new flexlm don't work together.
>> Had a cam/cas oob old keycode.  Installed a second cas
>> real-ip with flexlm license file.  Ended up with 1 cas.  Had
>> to reinstall the cam key to get it back online and call
>> support to get them to remake me a flexlm key with 1cam/2cas.
>>  Hopefully it gets here soon.
>> 
>> Ken Nelson
>> Network Manager
>> Marietta College
>>